TC Electronics Finalizer

finalizer-96k-persp.png
finalizer-96k-persp.png

TC Electronics Finalizer

$0.00

The Finalizer is carefully designed to optimise the overall levels and enhance the energy in your mix. The use of a three-band compressor, limiter and expander makes the dynamics section of the Finalizer extremely flexible, while maintaining the fidelity of the original material. In combination with a “normalizer” and an in-built five-band equaliser, the Finalizer gives you a very powerful tool to complete the all important final mix and master.

Add To Cart

Specs:

Digital Inputs and Outputs

  • Connectors: XLR (AES/EBU), RCA Phono (S/PDIF), Optical (Tos-link, ADAT)
  • Formats: AES/EBU (24 bit), S/PDIF (24 bit), EIAJ CP-340, IEC 958, EIAJ Optical (Tos-link), ADAT Lite pipe
  • Word Clock Input: RCA Phono, 75 Ω, 0.6 to 10 Vpp
  • Sample Rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • Processing Delay: 0.2 ms @ 48 kHz, 0.1 ms @ 96 kHz
  • Frequency Response DIO: DC to 23.9 kHz ± 0.01 dB @ 48 kHzDC to 47.9 kHz ± 0.01 dB @ 96 kHz
  • Compressor THD+N: -130 dB (0.00003%) @ 10 dB Compression, 20 Hz-20 kHz
  • Sample Rate Conversion Type: Asynchronous
  • Dynamic Range: 130 dB
  • THD+N: -106 dB 44.1 to 48 kHz @ 1 kHz, -2 dBFS
  • Input Range: 31 kHz to 49 kHz

Analog Inputs

  • Connectors: XLR balanced (pin 2 hot)
  • Impedance: 20k Ω
  • Max Input Level: +22 dBu (balanced)
  • Sensitivity: @ 12 dB headroom: -22 dBu to +10 dBu
  • A to D Conversion: 24 bit (6.144 MHz delta sigma @ 48/96 kHz)
  • A to D Delay: 0.8 ms @ 48 kHz, 0.4 ms @ 96 kHz
  • Dynamic Range: >103 dB (unweighted, BW=22 kHz), >106 dB(A)
  • THD: -95 dB (0,0018 %) @ 1 kHz, -6 dBFS (FS @ +16 dBu)
  • Frequency Response: 10 Hz to 20 kHz: +0/-0.2 dB @ 48 kHz10 Hz to 45 kHz: +0/-1 dB @ 96 kHz
  • Crosstalk: <-60 dB, 10 Hz to 20 kHz, typical -90 dB @ 1 kHz

Analog Outputs

  • Connectors: XLR balanced (pin 2 hot)
  • Impedance: 100 Ω (active transformer)
  • Max Output Level: +22 dBu (balanced)
  • D to A Conserion: 24 bit (6.144 MHz delta sigma @ 48/96 kHz)
  • D to A Delay: 0.57 ms @ 48 kHz0.28 ms @ 96 kHz>100
  • Full Scale Output Range: -10 dBu to +22 dBu
  • Dynamic Range: 100 dB (unweighted, BW=22KHz), >104 dB(A)
  • THD: -82 dB (0.008 %) @ 1 kHz-6 dBFS (FS @ +16 dBu)
  • Frequency Response: 10 Hz to 20 kHz+0/-0.5 dB @ 48 kHz10 Hz to 45 kHz+0/-3 dB @ 96 kHz
  • Crosstalk: <-60 dB, 10 Hz to 20 kHztypical –90 dB @ 1 kHz
  • MIDI In/Out/Thru: 5 Pin DIN