Specs:

System

• Sampling Frequency internal: 32, 44.1, 47.952, 48, 48.048, 88.2, 96, 96.096, 176.4, 192 kHz external clocking: 32–192 kHz via word clock input Internal
• Data Path and Processing: 32 bit, 192 dB dynamic range
• A/D, D/A Converters: 24 bit, 192 kHz sampling rate maximum, A/D converters on socketed, field-upgradeable daughter board
• A/D Dynamic Range: 114 dB, A-weighted bandwidth 110 dB, 20 Hz–22 kHz bandwidth
• D/A Dynamic Range: 112 dB, A-weighted bandwidth 108 dB, 20 Hz–22 kHz bandwidth
• Metering: 76-segment (4 x 19), sunlight-viewable selectable peak, VU, or peak (with or without peak hold) with VU ballistics, variable brightness

Analop Input

• Frequency Response Mic or Line: 10 Hz–40 kHz, +0.1, -0.5 dB (gain controls centered)
• Equivalent Input Noise Mic: -128 dBu max (-130 dBV), 150 ohm source, 20 Hz–20 kHz BW flat filter, gain fully up
• THD + Noise Mic: 0.004% max (1 kHz, 22 Hz–22 kHz BW, gain control down, -15 dBu input) Line: 0.004% max (1 kHz, 22 Hz–22 kHz BW, gain control down, +16 dBu input)
• Gain: Mic (normal gain mode): 24.3–67.4 dB, Mic (low gain mode): 9.3–52.4 dB, Mic (normal, fades to off gain mode): off (0)–67.4 dB, Mic (low, fades to off gain mode): off (0)–52.4 dB, Line: -6–18 dB, 0.1 dB increments
• Input Impedance Mic (XLR): 7.5k Ω Line (XLR and TA3): 20k Ω
• Input Clipping Level Mic input: -5 dBu minimum (normal gain mode, gain control fully down) Mic input: +10 dBu minimum (low gain mode, gain control fully down) Line input: +26 dBu minimum (gain control fully down)
• Input Topology Mic and Line: fully electronically balanced, RF, ESD, short, and overload protected; pin-2 hot, pin-3 cold
• Gain Matching Line inputs: ±0.1 dB, channel-to-channel
• CMRR Mic: 40 dB minimum at 80 Hz
• High-Pass Filters 40, 80, 160, 240 Hz @ 12/18/24 dB/oct (all menu selectable)
• Mic Powering: (each XLR selectable) 48 V phantom through 6.8k Ω resistors, 10 mA per mic available
• Mic Input Limiters: analog (pre-A/D converter), dual-stage optocoupler and FET, -4 dBFS threshold, 20:1 limiting ratio, 5 mS attack time, 200 mS release time

Output Analog

• Line Output Clipping Level: +20 dBu minimum, 10k Ω load Attenuation & Resolution 0–40 dB, 1 dB increments
• Output Topology Line: fully electronically-balanced, RF, ESD, short, and overload protected; pin-2 driven hot, pin-3 driven cold; let pin-3 float for unbalanced connections.

Inputs/Outputs – Digital

• AES3-id: 75 Ω, 0.5 V p-p, S/PDIF compatible with RCA adapter

Digital Storage: 

• Internal hard drive: SATA interface 2.5-in hard drive 4200–7200 RPM supported, FAT32 formatted, up to 2 TB addressable serial numbers below 461509071000 use ATA-5 interface 1.8-in or 2.5-in hard drive 4200–7200 RPM supported, FAT32 formatted, up to 2 TB addressable
• CompactFlash: CF type I, II, and + (microdrive) compatible, FAT32 formatted, up to 2 TB addressable
• File Types: WAV (AES-31 format), mono or polyphonic, at supported Fs, 24-bit or 16-bit FLAC, (Free Lossless Audio Codec) MP3 @ 32, 64, 96, 128, 160, 192, 256, or 320 kb/s stereo MP2 @ 64, 96, 128, 160, 192, 256, or 320, 384 kb/s stereo
• Utilities format, and speed test for internal HD, CF, and external drive volumes

Data Transfer

• FireWire: drive-mode, IEEE-1394a compliant, 6-pin FireWire, Windows 2000, XP, Vista, Mac OS X only
• C. Link: 6-wire modular input and output, RS-232 machine control, word clock, time code transfer

Timecode

• Modes Supported: free run, record run, 24 hour run, external time code receive
• Frame Rates: 23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND, 30+
• Accuracy: <0.2 ppm, when tuned with Ambient Master Controller, holds TC clock for 8 hours after main bat- tery removal (AA time code battery installed); after 8 hours, retains time of day
• Input / Output: 20k Ω impedance, 0.3V p-p (–8 dBu) minimum / 1k Ω impedance, 3.0V p-p (+12 dBu)