Skeletal remote antenna for decreased wind loading. The ALP Series antennas are a Log Periodic Dipole Array (LPDA) design that provides a useful directional pattern over a broad frequency bandwidth.

·         ALP500, ALP620

·         Pattern Gain: +7dBi (isotropic)

·         +4dBd (over dipole)

·         Range: 450-862 MHz

·         Weight: ALP500: 14.2 oz.

·         ALP620: 9.4 oz.

·         ALP650/E Series: 12 oz.

·         Connector: 50 Ohm BNC

·         Dimensions: 12” high x 10.5” deep x 1.5” wide

·         (ALP650 without mounting hardware)

·         ALP650 Series with RF Amplifier

·         Pattern Gain: +7dBi (isotropic)

·         +4dBd (over dipole

·         Passband:

·         ALP650L/E (RoHS compliant) 470.000 - 700.000 MHz

·         ALP650M/E (RoHS compliant) 537.000 - 770.000 MHz

·         ALP650H/E (RoHS compliant) 640.000 - 870 .000 MHz

·         RF Gain: +12 dB with 0dB attenuator

·         +8 dB with 4dB attenuator

·         +5 dB with 7dB attenuator

·         Third Order Intercept: +27 dBm @ input (+41 dBm output)

·         Weight: 12 oz. (all versions)

·         Power Requirements: 8V to 16V DC at the input jack;

·         auto reset poly fuse protection circuit;

·         constant power switching supply

•         8V DC (125 to 145 mA)

•         12V DC (83 to 106 mA)

•         14.4V DC (69 to 89 mA)

•         16V DC (60 to 80 mA)

·         Phantom Powering: DC voltage supplied via coaxial cable by

·         UMC16B,

·         VRM input jack or BIAS-T power inserter

·         (70 to 80 mA)

·         Power Consumption: 1.2 Watt nominal (switching regulator)